Spare Parts Equipment
Wear part Roller Shell of Double Roller Extrusion Granulator
Working surface of the double roller extrusion granulator. The shell presses feed into a uniform sheet that is later broken into granules, so its profile decides granule shape and how often the machine has to be stopped.
Part appearance reference · made to order
✓Source-aware dataPublished values remain separate from engineering review.
✓Material firstSelection starts with feed condition and duty.
✓Line integrationUpstream and downstream interfaces are reviewed.
✓Responsive mediaImages use WordPress responsive output.
✓Project validationFinal configuration follows technical confirmation.
01Overview
Equipment context
✓
Wear surface
Works directly against the feed
✓
Cast steel
Hardened for continuous pressure
✓
Profile accuracy
Governs granule shape and yield
✓
Replaceable
Swapped without rebuilding the roll
✓
Custom sizing
Made to the granulator model
01
Function
What this part does
The roller shell is the part that actually forms the product
Material is fed between two counter-rotating rolls and compacted into a sheet under pressure. The shell profile controls how that sheet releases, how evenly the load is distributed and how much fines come back in the recycle loop. Because it is the first surface to wear, shell condition is usually the reason output drifts before anything else in the machine does.
Engineer’s note
Send the granulator model and the current shell drawing or sample. Profile, groove pattern and hardness are made to match, and dimensional checks are issued before shipment.
02
Specification
Technical parameters
MaterialCast steel (customizable)
SizeMatched to the roller diameter and pocket pattern
FunctionForms the briquette pocket surface that compacts feed between the two rollers
Applicable equipmentDouble Roller Extrusion Granulator
Before ordering
- Equipment model and drum or roll diameter
- Existing part drawing, photo or sample
- Required quantity and delivery date
Dimensions and material grade are confirmed in writing before production.
03
Compatibility
Equipment this part fits
Equipment this part is made for.
Project consultation
Keep the line running
Send the equipment model and a photo or drawing of the worn part. We will confirm the replacement dimensions and recommend a spare set.
Talk to an engineer
06Verified source
Published technical data
| Material |
Cast steel (customizable) |
| Size |
Matched to the roller diameter and pocket pattern |
| Function |
Forms the briquette pocket surface that compacts feed between the two rollers |
| Applicable equipment |
Double Roller Extrusion Granulator |
Project inquiry
Confirm the selection basis for Roller Shell of Double Roller Extrusion Granulator
Share the material, target capacity, finished product and site conditions so the next engineering step can be defined.