
New-Type Organic Fertilizer Granulator
Stirring-tooth drum that pellets fermented organic material, so no separate binder stage is needed.
View details →
Get a Proposal
Compare each machine by material, duty, product target and connected process.

Confirm composition, moisture, particle condition and contaminants.
State capacity with units, operating hours and variability.
Define form, size, moisture, formula and package.
Include upstream, downstream, utilities and environmental controls.
9 dedicated pages with distinct names and process roles.

Stirring-tooth drum that pellets fermented organic material, so no separate binder stage is needed.
View details →
Inclined rotating disc that rolls fines into round granules; pellet size follows the disc angle and rim height.
View details →
Rotating drum with internal flights that tumble and densify the feed into uniform granules.
View details →
Drum granulator configured for organic feed, with spray nozzles along the shell to hold the mix at granulating moisture.
View details →
Two pocketed rollers press low-moisture powder into briquettes, so the product skips the drying step.
View details →
Flat die and roller press compact fines into pellets; changing the die sets the pellet diameter.
View details →
Rotating cylinder that rounds finished granules and knocks off sharp edges before bagging.
View details →
Disc granulator set up for clay and bentonite litter, with a wider disc for the lighter feed.
View details →
Disc granulator for soda ash fines, with wetted parts chosen for a corrosive feed.
View details →Unsupported catalogue numbers are not invented. Open each page for its verified-data status.
Reject options outside moisture, size, contamination or flow limits.
Match the physical or biological transformation required.
Check buffers, recycle and the slowest connected stage.
Compare wear, cleaning, energy, labor and maintenance access.
Manure, compost, biomass and other validated organic feedstocks.
NPK, compound, BB or specialty formulas where the mechanism fits.
Verified mineral, carbon-based and soil-amendment applications.

Combines preparation, proportioning, granulation and finishing stages into an engineered fertilizer production route.
View details →
Combines preparation, proportioning, granulation and finishing stages into an engineered fertilizer production route.
View details →
Combines preparation, proportioning, granulation and finishing stages into an engineered fertilizer production route.
View details →Use the case finder to match material, finished product, capacity, country or region and process technology. Illustrative visuals are labelled separately from project facts.
Filter project casesNo. Material data, duty, product target and connected stages are required.
They will be published only from approved manufacturer datasheets. Current pages identify missing specifications rather than inventing them.
Yes, after checking condition, duty, interfaces, elevation, controls and safety requirements.

Compare the feed behavior, formulation, target granule and downstream finishing—not only nominal capacity.
View details →
A practical guide to fermentation readiness, moisture control, crushing, granulation and finishing.
View details →
The raw-material, product, site and utility information engineers need before configuration.
View details →A production endpoint is still required before this form can transmit.