Alternative configuration
Solid-Liquid Separator
Reduces free liquid and prepares wet organic feedstock for composting or further treatment.
View details →Home / Machines / Dewatering & Solid-Liquid Separation Equipment / Multi-plate Screw Press Dewatering Machine
Dewatering & Solid-Liquid Separation EquipmentConfigurable system
Multi-plate Screw Press Dewatering Machine
Stainless-steel multi-plate screw press that dewaters sludge continuously at 1–20 t/h and discharges a stackable cake that can be hauled away or composted. Selection follows the sludge type, solids load and the dewatering duty the line has to hold.
RoleSeparated solids and collected liquid fractionConfigurationPublished model rangeIntegrationComplete-line ready
Equipment appearance reference · final configuration varies
✓
Process fit
Selected for the real material
✓
Stable flow
Matched upstream and downstream
✓
Maintainability
Access and wear parts considered
✓
Controls
Interlocks planned with the line
✓
Support
Installation and commissioning scope
01
Application boundary
Who is this machine for?
Recommended when
- Manure pretreatment before composting
- The feed condition is measured and repeatable
- The adjacent stages can be balanced to the same duty
- Maintenance access and local utilities are defined
Review carefully when
- Feed with uncontrolled stones, metal or oversized debris
- Raw material varies without a buffer or pretreatment plan
- Only nominal capacity is known
- Dust, odor, liquid or heat balance is not defined
02
Equipment overview
Process role and working principle
Multi-plate screw pressing squeezes free water out of the sludge
Reduces free liquid and prepares wet organic feedstock for composting or further treatment. The machine is engineered around the actual duty so material residence, transfer and control logic stay compatible with the next stage.
Engineer’s note
Final model, motor, dimensions and wear configuration should be issued only after feed tests or a documented material review.
03
Working sequence
How material moves through the equipment
1
Controlled feeding
The inlet stabilizes the duty.
2
Material engagement
Operating settings are tuned to the real feed.
3
Primary processing
Operating settings are tuned to the real feed.
4
Condition monitoring
Operating settings are tuned to the real feed.
5
Stable discharge
Operating settings are tuned to the real feed.
6
Transfer to next stage
The outlet is matched to downstream handling.
04
No invented specifications
Technical selection framework
Raw materialLiquid manure or high-moisture organic slurry
Inlet conditionMoisture, particle size, bulk density and contaminants
Required dutyHourly throughput and operating schedule
Product targetSeparated solids and collected liquid fraction
UtilitiesVoltage, fuel, water and compressed air as applicable
Model / power / sizeIssued after engineering confirmation
Information to send
- Material photos and lab data
- Hourly or daily production target
- Upstream and downstream equipment
- Available layout and elevation
- Local electrical and environmental standard
05
Published model data
Official reference specifications
The table below is reproduced from the referenced manufacturer page and remains subject to project confirmation.
Manufacturer-published reference
View source page ↗Multi-plate Screw Press Dewatering Machine
Capacity1–20 t/h
MaterialStainless steel
Voltage380 V
DischargeDewatered sludge cake
The referenced manufacturer page publishes this machine as a 1–20 t/h range without a per-model table, so no model list is reproduced here.
Published values are reference data. Final duty, configuration and acceptance values are confirmed against the material, operating hours, local utilities and complete-line mass balance.
06
Maintainable construction
Key assemblies
01
Feed pump / inlet
Feed pump with a flow meter into the flocculation tank, so polymer dose follows the actual solids load.
02
Multi-plate stack
Stacked fixed and moving rings that dewater by gravity and by the screw's compression.
03
Screw shaft and drive
Variable-pitch screw through the ring stack, driven by a gearmotor with torque monitoring.
04
Liquid and solids outlets
Filtrate returns to the tank; cake leaves through the discharge cone against a counter-pressure plate.
07
Plant integration
Position in a complete production line
Conveying, buffers, dust control and automation are finalized with the plant layout.
08
Related equipment
Compare options in the same process family
Alternative configuration
Inclined Screen Solid-Liquid Separator
Reduces free liquid and prepares wet organic feedstock for composting or further treatment.
View details →
Alternative configuration
High-Frequency Vibratory Manure Separator
Screens and compacts slurry at high frequency to split it into a solid fraction and a liquid fraction.
View details →09
Selection FAQ
Questions engineers answer before quotation
Which model is suitable for my material?
Model selection follows material condition, capacity, operating hours and the connected process. Send representative data or samples for confirmation.
Can this machine fit an existing production line?
Usually, after checking inlet and outlet height, capacity, controls, utilities, access and the duty of adjacent stages.
What is included in the final technical proposal?
The confirmed proposal can include model, process duty, motor and utility data, interface dimensions, scope boundary and service plan.
Can wear parts and maintenance be planned in advance?
Yes. Material abrasiveness, operating schedule and local service conditions are used to define wear parts and recommended spares.
10
Related evidence
Continue the technical review
Selection guide
Use the decision criteria before fixing a granulation or process mechanism.
Read the guide →Complete solutions
See how the equipment connects to upstream and downstream stages.
Explore solutions →Project records
Filter cases by material, product, capacity, location and technology.
Browse cases →11
Equipment inquiry
Request a model recommendation
Published ranges support preliminary comparison; the approved proposal controls final model, power, dimensions and weight.
Project consultation
Discuss your projectBuild the right line around your material
Share moisture, composition, output target, final product and site constraints. Our engineers will propose a practical configuration.
+8615981847286WhatsApp
Please enter the contentSearch
Click to return to the topTOP