Alternative configuration
Vertical Crusher
Reduces feed material to a controlled particle size for stable downstream processing.
View details →Crushing & Grinding EquipmentConfigurable system
Semi-Wet Material Crusher
Swing-hammer rotor for sticky, high-moisture material without screen blinding. Selection is based on the material, capacity and connected process—not a catalogue number alone.
RoleControlled particle size for mixing or granulationConfigurationPublished model rangeIntegrationComplete-line ready
Equipment appearance reference · final configuration varies
✓
Process fit
Selected for the real material
✓
Stable flow
Matched upstream and downstream
✓
Maintainability
Access and wear parts considered
✓
Controls
Interlocks planned with the line
✓
Support
Installation and commissioning scope
01
Application boundary
Who is this machine for?
Recommended when
- Pre-granulation preparation and recycle crushing
- The feed condition is measured and repeatable
- The adjacent stages can be balanced to the same duty
- Maintenance access and local utilities are defined
Review carefully when
- Hard foreign objects or feed outside the confirmed moisture range
- Raw material varies without a buffer or pretreatment plan
- Only nominal capacity is known
- Dust, odor, liquid or heat balance is not defined
02
Equipment overview
Process role and working principle
Impact, shear or chain action breaks agglomerates and oversize particles
Reduces feed material to a controlled particle size for stable downstream processing. The machine is engineered around the actual duty so material residence, transfer and control logic stay compatible with the next stage.
Engineer’s note
Final model, motor, dimensions and wear configuration should be issued only after feed tests or a documented material review.
03
Working sequence
How material moves through the equipment
1
Controlled feeding
The inlet stabilizes the duty.
2
Material engagement
Operating settings are tuned to the real feed.
3
Primary processing
Operating settings are tuned to the real feed.
4
Condition monitoring
Operating settings are tuned to the real feed.
5
Stable discharge
Operating settings are tuned to the real feed.
6
Transfer to next stage
The outlet is matched to downstream handling.
04
No invented specifications
Technical selection framework
Raw materialDry or semi-wet fertilizer feedstock
Inlet conditionMoisture, particle size, bulk density and contaminants
Required dutyHourly throughput and operating schedule
Product targetControlled particle size for mixing or granulation
UtilitiesVoltage, fuel, water and compressed air as applicable
Model / power / sizeIssued after engineering confirmation
Information to send
- Material photos and lab data
- Hourly or daily production target
- Upstream and downstream equipment
- Available layout and elevation
- Local electrical and environmental standard
05
Published model data
Official reference specifications
The table below is reproduced from the referenced manufacturer page and remains subject to project confirmation.
Manufacturer-published reference
View source page ↗Semi-wet Material Crusher
Capacity1–8 t/h
Suitable feed moistureTypically 25–50%
Output fineness50 mesh (official table)
ConstructionCarbon steel Q235 / alloy
| Model | Power (kW) | Capacity (t/h) | Fineness (mesh) | Inlet (mm) | Dimensions (mm) |
|---|---|---|---|---|---|
| SXSF-40 | 22 | 1–1.5 | 50 | 400 × 240 | 1200 × 1350 × 900 |
| SXSF-60 | 30 | 1.5–3 | 50 | 500 × 300 | 1300 × 1450 × 1300 |
| SXSF-90 | 37 | 3–5 | 50 | 550 × 410 | 1800 × 1850 × 1700 |
| SXSF-120 | 75 | 5–8 | 50 | 650 × 500 | 2100 × 2600 × 2130 |
Published values are reference data. Final duty, configuration and acceptance values are confirmed against the material, operating hours, local utilities and complete-line mass balance.
06
Maintainable construction
Key assemblies
01
Metered inlet
Welded feed box with an adjustable gate, set so the rotor sees a steady ribbon of sticky material instead of a slug.
02
Crushing chamber
Formed and welded steel shell, lined at the impact zone; no screen deck, so high-moisture feed cannot blind the discharge.
03
Rotor / chain assembly
Forged shaft on swing-hammer arms, dynamically balanced and replaceable through the side access panel without stripping the housing.
04
Screen or controlled outlet
Open discharge with a replaceable wear plate; the outlet is sized to the granulator feed rather than to a fixed screen aperture.
07
Plant integration
Position in a complete production line
Conveying, buffers, dust control and automation are finalized with the plant layout.
08
Related equipment
Compare options in the same process family
Alternative configuration
Chain Crusher
Reduces feed material to a controlled particle size for stable downstream processing.
View details →09
Selection FAQ
Questions engineers answer before quotation
Which model is suitable for my material?
Model selection follows material condition, capacity, operating hours and the connected process. Send representative data or samples for confirmation.
Can this machine fit an existing production line?
Usually, after checking inlet and outlet height, capacity, controls, utilities, access and the duty of adjacent stages.
What is included in the final technical proposal?
The confirmed proposal can include model, process duty, motor and utility data, interface dimensions, scope boundary and service plan.
Can wear parts and maintenance be planned in advance?
Yes. Material abrasiveness, operating schedule and local service conditions are used to define wear parts and recommended spares.
10
Related evidence
Continue the technical review
Selection guide
Use the decision criteria before fixing a granulation or process mechanism.
Read the guide →Complete solutions
See how the equipment connects to upstream and downstream stages.
Explore solutions →Project records
Filter cases by material, product, capacity, location and technology.
Browse cases →11
Equipment inquiry
Request a model recommendation
Published ranges support preliminary comparison; the approved proposal controls final model, power, dimensions and weight.
Project consultation
Discuss your projectBuild the right line around your material
Share moisture, composition, output target, final product and site constraints. Our engineers will propose a practical configuration.
+8615981847286WhatsApp
Please enter the contentSearch
Click to return to the topTOP