Alternative configuration
Automatic Feeder
Meters, buffers or homogenizes materials to maintain stable recipe control and line flow.
View details →Feeding, Batching & Mixing EquipmentConfigurable system
Automatic Batching Machine
Meters, buffers or homogenizes materials to maintain stable recipe control and line flow. Selection is based on the material, capacity and connected process—not a catalogue number alone.
RoleStable metered flow or homogeneous recipeConfigurationPublished model rangeIntegrationComplete-line ready
Equipment appearance reference · final configuration varies
✓
Process fit
Selected for the real material
✓
Stable flow
Matched upstream and downstream
✓
Maintainability
Access and wear parts considered
✓
Controls
Interlocks planned with the line
✓
Support
Installation and commissioning scope
01
Application boundary
Who is this machine for?
Recommended when
- Recipe-controlled fertilizer lines and continuous production
- The feed condition is measured and repeatable
- The adjacent stages can be balanced to the same duty
- Maintenance access and local utilities are defined
Review carefully when
- Unstable bridging materials without feeder testing
- Raw material varies without a buffer or pretreatment plan
- Only nominal capacity is known
- Dust, odor, liquid or heat balance is not defined
02
Equipment overview
Process role and working principle
Controlled feeding, weighing and mixing maintain formulation consistency
Meters, buffers or homogenizes materials to maintain stable recipe control and line flow. The machine is engineered around the actual duty so material residence, transfer and control logic stay compatible with the next stage.
Engineer’s note
Final model, motor, dimensions and wear configuration should be issued only after feed tests or a documented material review.
03
Working sequence
How material moves through the equipment
1
Controlled feeding
The inlet stabilizes the duty.
2
Material engagement
Operating settings are tuned to the real feed.
3
Primary processing
Operating settings are tuned to the real feed.
4
Condition monitoring
Operating settings are tuned to the real feed.
5
Stable discharge
Operating settings are tuned to the real feed.
6
Transfer to next stage
The outlet is matched to downstream handling.
04
No invented specifications
Technical selection framework
Raw materialOne or more prepared fertilizer ingredients
Inlet conditionMoisture, particle size, bulk density and contaminants
Required dutyHourly throughput and operating schedule
Product targetStable metered flow or homogeneous recipe
UtilitiesVoltage, fuel, water and compressed air as applicable
Model / power / sizeIssued after engineering confirmation
Information to send
- Material photos and lab data
- Hourly or daily production target
- Upstream and downstream equipment
- Available layout and elevation
- Local electrical and environmental standard
05
Published model data
Official reference specifications
The table below is reproduced from the referenced manufacturer page and remains subject to project confirmation.
Manufacturer-published reference
View source page ↗Static Batching Machine
Capacity1–6 t/h
ModeBatch weighing with load-cell proportioning
Finished materialBatched mixed materials
Voltage220 / 380 / 415 / 440 / 480 V · 50 / 60 Hz
The listed range is for the official static batching reference. Hopper count, weighing accuracy, feeder type and cycle time are confirmed from the recipe.
06
Maintainable construction
Key assemblies
01
Storage / hopper
Specified for the operating load, material contact and maintenance plan.
02
Metering device
Specified for the operating load, material contact and maintenance plan.
03
Mixing chamber
Specified for the operating load, material contact and maintenance plan.
04
Load cells and controls
Specified for the operating load, material contact and maintenance plan.
07
Plant integration
Position in a complete production line
Conveying, buffers, dust control and automation are finalized with the plant layout.
08
Related equipment
Compare options in the same process family
Alternative configuration
Screw Feeder
Meters, buffers or homogenizes materials to maintain stable recipe control and line flow.
View details →
Alternative configuration
Disc Feeder
Meters, buffers or homogenizes materials to maintain stable recipe control and line flow.
View details →
Alternative configuration
Screw Weighing Scale
Meters, buffers or homogenizes materials to maintain stable recipe control and line flow.
View details →09
Selection FAQ
Questions engineers answer before quotation
Which model is suitable for my material?
Model selection follows material condition, capacity, operating hours and the connected process. Send representative data or samples for confirmation.
Can this machine fit an existing production line?
Usually, after checking inlet and outlet height, capacity, controls, utilities, access and the duty of adjacent stages.
What is included in the final technical proposal?
The confirmed proposal can include model, process duty, motor and utility data, interface dimensions, scope boundary and service plan.
Can wear parts and maintenance be planned in advance?
Yes. Material abrasiveness, operating schedule and local service conditions are used to define wear parts and recommended spares.
10
Related evidence
Continue the technical review
Selection guide
Use the decision criteria before fixing a granulation or process mechanism.
Read the guide →Complete solutions
See how the equipment connects to upstream and downstream stages.
Explore solutions →Project records
Filter cases by material, product, capacity, location and technology.
Browse cases →11
Equipment inquiry
Request a model recommendation
Published ranges support preliminary comparison; the approved proposal controls final model, power, dimensions and weight.
Project consultation
Discuss your projectBuild the right line around your material
Share moisture, composition, output target, final product and site constraints. Our engineers will propose a practical configuration.